top of page

PowerPlus Belts

High Performance POWERPLUS Curvilinear H and S Tooth Profiles Rubber Timing Belt

Our rubber Timing Belt Movendis PowerPlus offers higher power transmission capabilities, thanks to higher torque delivery; about +30% above the standard rubber Timing Belt Movendis range.

It combines the very best in technology and construction design to give improved performance and extended product life.

Alike our standard rubber Timing Belt, this belt is based on Chloroprene raw material formulated in Germany and glass fiber cord produced in Japan.

Moreover, the rubber Timing Belt Movendis PowerPlus is enriched with aramid fiber into the rubber, our Timing Belt offers both tooth pitch matching and high wear resistance.

We have not compromised noise for extra power rating delivered by our PowerPlus Timing Belt; indeed the operating noise comparison with standard curvilinear Timing Belt is excellent.

Our Movendis Power Transmission PowerPlus Belts are build up for working very quietly, feature perfect gearing with pulley thanks to perfect pitch profile and thus can be used for low noise level applications.

Movendis Power Transmission PowerPlus drives provide positive, trouble- free power transmission in low speed— high torque applications and offer many advantages over conventional chain, gear and other belt drives.

The tooth design substantially improves stress distribution and allows extra high loading. The molded teeth enter and leave the sprocket grooves smoothly with negligible friction—functioning in much the same way as teeth on a gear.

Demonstrated advantages:

Low noise
No stretch
No corrosion, no lubrification
High load capacity, with clean operation, maintenance free Hardness of 85ShA+/-5

Even at high speeds, the drive runs smoothly and quietly, thanks to our treated nylon fabric and perfect match between belt and pulley.
* 3M & 5M: light electrical appliance, electric power tools, office machines, postal machines, money handling machines

* 8M & 14M: machine tools, pulp & paper, textiles, printing, high power applications– pumps, compressors, centrifuges, HVAC
* S3M, S5M, S8M & S14M: linear power applications–robots, material handling, transport

Temperature range from -30°C up to +100°C

Meets RoHS and REACH requirements

Rubber teeth and backing

Prepared in Germany our special rubber compound chloroprene (CR) is loaded with Aramid fiber mixed in the rubber to deliver superior power transmission capability.

This strong chloroprene is bonded to the tensile cord for protection against grime, oil and moisture. They are precisely formed and accurately spaced to assure smooth meshing with the sprocket grooves.

Tensile cord

Very low stretch glass fiber produced in Japan, our glass fiber are helitcally wound on the width, lateral stability is ensured by computerized building appliance of Z and S cords perfectly paired.

Fabric facing

Provides high strength, excellent flex life and high resistance to elongation.

A layer of specially-treated high strength fiberglass tensile cord ensures excellent flex life and provides a high resistance to elongation. This gives the belt the high strength which allows for the high load capacity.

Special thickness of 1.25 for a tough nylon fabric with a low coefficient of friction thru surfaces of the teeth, ensuring protection and durable wearing for long services.

Teeth profiles

3M, 5M, 8M, 14M OR S3M, S5M, S8M, S14M OR R5M, R8M, R14M OR GT2, GT3

Classical Imperial_.png
R PP H .png
R PP S.png

POWERPLUS Curvilinear Double Sided Timing Belt

DSL Classical Imperial.png

Dual driving surfaces allow for unique, problem solving drive designs our Movendis Power Transmission PowerPlus have teeth on both sides to provide synchronization from both driving surfaces. This special feature makes possible unique drive designs such as multipoint drives, rotation reversal with one belt, serpentine drives, etc. They may also provide solutions to other difficult design problems.

Our Dual Sided PowerPlus Timing Belts can transmit 100% of their maximum rated load capacity from either side of the belt. They are similar in construction to regular synchronous belts, including nylon-faced teeth on both sides.

Alike our standard rubber Timing Belt, this belt is based on Chloroprene raw material formulated in Germany and glass fiber cord produced in Japan.


These belts are ideal for mutiple pulleys drives, reversed rotation drive and serpentine drives.

The maxium power rating of the belt is the sum carried by both sides; any combinaison of load between the side is possible till transmit 100% of the max power rating of the belt.

We have not compromise noise for extra power rating delivered by our PowerPlus Timing Belt; indeed the operating noise comparison with standard curvilinear Timing Belt is excellent.

Our Movendis Power Transmission are build up for working very quietly, features perfect gearing with pulley thanks to perfect ptich profile and thus can be used for low noise level applications.

Demonstrated advantages:

Low noise
No stretch
No corrosion, no lubrificatio
High load capacity, with clean operation, maintenance free Hardness of 85ShA+/-5

Temperature range from -30°C up to +100°C

Meets RoHS and REACH requirements

Rubber teeth and backing

Prepared in Germany our special rubber compound chloroprene (CR) is loaded with Aramid fiber mixed in the rubber to deliver superior power transmission capability.

This strong chloroprene is bonded to the tensile cord for protection against grime, oil and moisture. They are precisely formed and accurately spaced to assure smooth meshing with the sprocket grooves.

Tensile cord

Very low stretch glass fiber produced in Japan, our glass fiber are helitcally wound on the width, lateral stability is ensured by computerized building appliance of Z and S cords perfectly paired.

Fabric facing

Provides high strength, excellent flex life and high resistance to elongation.

A layer of specially-treated high strength fiberglass tensile cord ensures excellent flex life and provides a high resistance to elongation. This gives the belt the high strength which allows for the high load capacity.

Special thickness of 1.25 for a tough nylon fabric with a low coefficient of friction thru surfaces of the teeth, ensuring protection and durable wearing for long services.

Teeth profiles

D/5M, D/8M, D/14M OR D/S5M, D/S8M, D/S14M OR D/R5M, D/R8M, D/R14M

DS H Curvi.png
DS S Curvi.png
DS R Curvi.png

High Perfomance POWERPLUS 2. Curvilinear Rubber Timing Belt

The latest and gratest technology deployed in rubber Timing Belts.

This is the highest power rating Timing Belt within the range of Movendis Power Transmission, indeed the PowerPlus 2 is a 4th generation Timing Belt.
Based on the latest rubber technology advanced materials, Movendis Power Transmission designed a Timing Belt with extreme power rating capability.

With higher temperature resistance up to +140°C, as well as the lowest temperature resistance down to -40°C, it represents the largest temperature range capability.
Test and approved the superior longevity, spefications to performance, and uptime operating running.

Thanks to the superior features, the Movendis Power Transmission PowerPlus 2 can be used in replacement of PowerPlus or standard with and advantageous reduction of the width of belt thanks to greater power rating capability, thus the overall reduction of weight of drive is ligther as pulleys are also downsided.

With rubber formulated in USA or in Germany, based on EPDM rubber (ethylene propylene diene monomer) , it combines the very best in technology and construction design to give improved performance and extended product life.

Alike our standard rubber Timing Belt, the glass fiber cord produced in Japan, has been specialy designed for maximum bonding with EPDM rubber backing and teeth.

Demonstrated advantages:

Extensive Temperature Range
Superior Power Rating Capacity Maximize longevity and uptime running Perfect Teeth progile and high resistance Low noise
No stretch
No corrosion, no lubrification

Meets RoHS and REACH requirements

Rubber teeth and backing

Formulated in USA backing and teeth rubber is based on a high performance eco-friendly EPDM (ethylene propylene diene monomer) elastomer high-torque synchronous belt.

They are precisely formed and accurately spaced to assure smooth meshing with the sprocket grooves.

Tensile cord

Coming from Japan, our extreme performant glass fiber cord, is perfectly bonded to the EPDM rubber, and deliver no stretch, high strenght.

Fabric facing

Provides high strength, excellent flex life and high resistance to elongation.

Teeth profiles

3M, 5M, 8M, 14M OR S3M, S5M, S8M, S14M OR R5M, R8M, R14M OR GT2, GT3

Classical Imperial_.png
R PP2 H.png
R PP S.png
bottom of page