top of page

Curvilinear Teeth

Curvilinear H-Type Tooth Profile Timing Belt 

Our curvilinear H-type tooth profile belts are built with a rounded tooth profile to provide perfect matching to pulley gearing, while offering high wear resistance and high dynamic load. Allows compact design for minimum drive space requirements and low weight meaning better electrical efficiency output.

 

Such timing beltd guarantee a low zero tension, thus bearing and axle tension can be low.
Our rubber Timing Belt allows extensive speed range thanks to its teeth strength and flexibiliy of the belt.

Our flexible rubber backing ensures cord protection and perfect adhesion. This will allow for reverse idler drive.
This belt features minimal friction with a cover fabric that allows perfect positive engagement with pulleys. And it can suit multi-axial transmission, along with packaging, open door, robotic, or any linear motion system applications.

Temperature range from -30°C up to +100°C
Moderate resistance to common oils, good resistance to heat and cold environment
Low noise, high speed ratio, high belt speed
Meets RoHS and REACH requirements

Rubber teeth and backing

Perfect combination of best chloroprene (CR) prepared in Germany fibre grade materials, our rubber teeth and backing compound offers tooth pitch matching and high wear and vibration resistance. Our production process is highly precised and would ensure the timing belt teeth to have perfect match gearing on pulley.

Tensile cord

Designed and manufactured in Japan, our high strength glass fiber, both S and Z orientated monitored by computer, will ensure perfect belt tracking, keep dimensional stability and flexibility with no elongation.

Fabric facing

Featuring very low friction, low noise and long lasting protection of the teeth rubber, our polyamid fabric protects your belt and enable high power transmission

Teeth profiles

(HTD) 2M, 3M, 5M, 8M, 14M, 20M

Curvilinear H-Type.png
Curvi H type.png

Curvilinear S-Type Tooth Profile Timing Belt 

Curvi S type.png
Curvi S type.png

Our curvilinear S-type tooth profile belts are built with a rounded tooth profile to provide perfect matching to pulley gearing, while offering high wear resistance and high dynamic load. Allows compact design for minimum drive space requirements and low weight meaning better electrical efficiency output.

 

Such timing belts guarantee a low zero tension, thus bearing and axle tension can be low.
Our rubber Timing Belt allows extensive speed range thanks to its teeth strength and flexibiliy of the belt.

Our flexible rubber backing ensures cord protection and perfect adhesion. This will allow for reverse idler drive.
This belt features minimal friction with a cover fabric that allows perfect positive engagement with pulleys. And it can suit multi-axial transmission, along with packaging, open door, robotic, or any linear motion system applications.


Temperature range from -30°C up to +100°C
Moderate resistance to common oils, good resistance to heat and cold environment

Low noise, high speed ratio, high belt speed Meets RoHS and REACH requirements

Rubber teeth and backing

Made of highly grade of Chloroprene (CR) formulated in Germany, this polychloroprene teeth and backing rubber is robustly bonded to the tensile cord and fabric to precisely form the teeth to offer perfect gearing, low noise and great fatigue resistance.

Tensile cord

Very low stretch glass fiber produced in Japan, our glass fiber are helitcally wound on the width, lateral stability is ensured by computerized building appliance of Z and S cords perfectly paired.

Fabric facing

Featuring very low friction, low noise and long-lasting protection of the teeth rubber, our polyamid fabric protects your belt and enable high power transmission.

Teeth profiles

(STD) S2M, S3M, S4.5M, S5M, S8M AND S14M

Curvilinear R-Type Tooth Profile Timing Belt 

Our curvilinear R-type tooth profile belts are built with a rounded tooth profile to provide perfect matching to pulley gearing, while offering high wear resistance and high dynamic load. Allows compact design for minimum drive space requirements and low weight meaning better electrical efficiency output.

 

Such timing beltd guarantee a low zero tension, thus bearing and axle tension can be low.
Our rubber Timing Belt allows extensive speed range thanks to its teeth strength and flexibiliy of the belt.

Our flexible rubber backing ensures cord protection and perfect adhesion. This will allow for reverse idler drive.
This belt features minimal friction with a cover fabric that allows perfect positive engagement with pulleys. And it can suit multi-axial transmission, along with packaging, open door, robotic, or any linear motion system applications.

Temperature range from -30°C up to +100°C
Moderate resistance to common oils, good resistance to heat and cold environment
Low noise, high speed ratio, high belt speed
Meets RoHS and REACH requirements

Rubber teeth and backing

Perfect combination of best chloroprene (CR) prepared in Germany fibre grade materials, our rubber teeth and backing compound offers tooth pitch matching and high wear and vibration resistance. Our production process is highly precised and would ensure the timing belt teeth to have perfect match gearing on pulley.

Tensile cord

Designed and manufactured in Japan, our high strength glass fiber, both S and Z orientated monitored by computer, will ensure perfect belt tracking, keep dimensional stability and flexibility with no elongation.

Fabric facing

Featuring very low friction, low noise and long lasting protection of the teeth rubber, our polyamid fabric protects your belt and enable high power transmission

Teeth profiles

(RPP) R3M, R5M, R8M, R14M

Curvi R type.png
Curvi R type.png

Double Sided Curvilinear Tooth Profiles Timing Belt 

This belt will transmit equal power from both sides, as ir is made with strong glass fiber tensile cords. The fabric cover will allow for minimal friction and positive engagement with the pulleys.
Our Double-Sided Curvilinear Timing Belts are leveraging the properties and features from the single sided version. Our rubber Timing Belt allows extensive speed range thanks to its teeth strength and flexibiliy of the belt.

 

Our flexible rubber backing ensures cord protection and perfect adhesion. This will allow for reverse idler drive.
This belt features minimal friction with a cover fabric that allows perfect positive engagement with pulleys.

Temperature range from -30°C up to +100°C
Moderate resistance to common oils, good resistance to heat and cold environment
Low noise, high speed ratio, high belt speed
Meets RoHS and REACH requirements

Rubber teeth and backing

Perfect combination of best chloroprene (CR) prepared in Germany fibre grade materials, our rubber teeth and backing compound offers tooth pitch matching and high wear and vibration resistance. Our production process is highly precised and would ensure the timing belt teeth to have perfect match gearing on pulley.

Tensile cord

Designed and manufactured in Japan, our high strength glass fiber, both S and Z orientated monitored by computer, will ensure perfect belt tracking, keep dimensional stability and flexibility with no elongation.

Fabric facing

Featuring very low friction, low noise and long lasting protection of the teeth rubber, our polyamid fabric protects your belt and enable high power transmission

Teeth profiles

(HTD) D/3M, D/5M, D/8M AND D/14M; (STD) D/S3M, D/S5M, D/S8M AND D/S14M; (RPP) D/R5M, D/R8M AND D/R14M

DS Curvi.png
DS H Curvi.png
DS S Curvi.png
DS R Curvi.png
bottom of page